TRIARC ENHANCED BCG - NP3
TRIARC ENHANCED BCG - NP3
TRIARC ENHANCED BCG - NP3
TRIARC ENHANCED BCG - NP3
TRIARC ENHANCED BCG - NP3
TRIARC ENHANCED BCG - NP3

TRIARC ENHANCED BCG – NP3

$299.00 SKU: TS-EBCG-NP3

FULL AUTO RATED
Material
Case Hardened 8620 Steel

 

Finish
NP3 (Coating Specs Below)

 

Gas Key
4130 Steel, attached with Grade 8 hardware and properly staked into a milled “valley”to ensure proper positioning

 

Ejection Port
Area is milled with added material for more strength and rigidity

 

Cam Pin
Hardened 4340 cam pin

 

Firing Pin
Mil Spec firing pin made of 8740 steel, center-less ground and Hard Chrome coated Carrier fits AR15/M4 compatible style Rifles (i.e.) .223/5.56mm, .300BLK

 

Bolt Assembly: The Bolt is “true” Mil Spec dimensions and external surfaces are CNC ground after heat treat for a precision fit.

Material
Case Hardened 9310 Steel.
*Properly heat treated 9310 steel is on average 8% stronger than Milspec standard Carpenter 158 steel, making the bolt stronger than the Milspec standard*

 

Finish
All Bolt components Shot Peened and Manganese Phosphate or Black Nitride

 

Extractor
4340 Steel, Manganese Phosphate coated – Mil Spec Extractor Spring & O-Ring Combination

 

MPI
Magnetic Particle Inspected

 

HPT
High Pressure Test

Out of stock

Join the waitlist to be emailed when this product becomes available

Description

Carrier Assembly: The enhanced bolt carrier is designed to reduce carrier tilt/cant during recoil and increasing reliability by strategically relocating key bearing surfaces. The enhanced carrier has fewer points of contact resulting in less friction area and the slight increase in carrier mass extends dwell time and ensures proper gas pressures for reliable extraction.

 

 

 

****Coating Notes*****

 

NP3® metal finish offers many benefits. NP3® permits firing for longer periods of time between cleaning, dirt and powder residue have no wet or oily surface to cling to. When cleaning is required, the effort needed is minimal – usually requiring only a soft cloth. NP3® is very corrosion resistant. It provides a high lubricity and low friction co-efficient, greatly increasing the life expectancy of a firearm due to reduced friction wear. NP3® is a satin gray, non-reflective color ideal for all firearms.

 

 

    • Increases reliability

 

    • It requires little to no oil for lubrication, although we recommend using some oil during break in.

 

    • Very accurate and even coatings on all activated surfaces.

 

    • Cleaning is minimal

 

    • Permits firing for longer periods of time between cleaning, as dirt and powder residue has no wet or oily surface to cling to.

 

    • NP3 has a micro hardness of 48-51 Rockwell as plated (nickel matrix).

 

    • NP3® is very corrosion resistant, a 1 mil (.001) coating exceeding a 250 hour salt spray test.

 

    • NP3® has a high lubricity and low friction co-efficient; therefore, the life expectancy of a firearm will be greatly increased due to reduced friction wear.

 

    • The coating is strippable with no effect on the base metal, allowing other coatings to be applied or a new coating of NP3® to be applied, if necessary.

 

    • NP3® plated onto stainless steel guns will prevent galling, a problem common with stainless steel.

 

    • NP3® is a satin gray, non-reflective color ideal for all firearms.

 

    • NP3® can be plated to all internal parts giving a smoothness to the action not found with any other coating.

 

    • In cases where the NP3® has been perforated, the corrosion shows no tendency to spread or migrate under the coating.

 

    • NP3® is guaranteed against corrosion, peeling or flaking for the lifetime of the firearm.