Your Cart
TRIARC Systems White Logo

TRIARC Systems Easy Pin Gas Block – *Cosmetic Blems*


Out of stock


TRIARC Easy Pin Gas Block

The TRIARC Easy Pin Gas Block’s design aids it to be quickly pinned to your barrel. The pre-cut hole means there is no wasted time by drilling through the gas block. This pre-cut hole is positioned low enough, so only the necessary amount of material from your barrel is removed to ensure a “bombproof” installation. Since there is less material to remove, pinning the barrel is easier to accomplish with a standard hand drill or drill press. We always recommend that a competent gunsmith do the installation. However, because of the gas block’s design, it is much easier for the home builder to accomplish the pinning of the gas block without catastrophic damage to the barrel or gas block.


Black Nitride Finish

4140 Steel Construction

Low Profile to Fit Inside All Handguards

.750” Internal Diameter

Pre-Cut for Easy Pinning

Gas Efficiency Through Exacting Tolerances

Comes with:

Gas Block

2- Knurled Set Screws

1- 5/64 Stainless Coiled Roll Pin

1- 1/8 Stainless Coiled Roll Pin

Tools Needed:

Drill Press or Hand Drill

1/8” drill bit

Roll pin punch


TRIARC Easy-Pin Gas Block – Instructions 

**Cosmetic  Blemishes.  Laser markings are not centered.  100% Functional**

** Blem item sales are final. No returns or refunds.**

Out of stock

Join the waitlist to be emailed when this product becomes available