FAST™ is a series of optic mounts and platforms that provide end users with a quicker sight picture than standard height mounts. A 2.26” optical centerline height provides faster/easier reticle acquisition while wearing electronic earpro/communications headsets, night vision goggles and gas masks and allows for more rapid visual processing of the battlefield by promoting a heads-up posture. A heads-up posture also helps users maintain a neutral spine position which is more comfortable while wearing helmets, plate carriers, and other heavy gear.
FAST™ Riser securely elevates block-type red dot optics with a standard lower 1/3 cowitness picatinny mount to a 2.26″ optical center line. FAST™ Riser provides an elevated M1913 Picatinny platform for direct attachment of optics such as EOTech EXPS®, Leupold LCO®, Vortex UH-1®, and other “lower 1/3” optics*.
*Technically, the FAST™ Riser will support “absolute cowitness” optics such as EOTech XPS®, Sig Sauer Romeo8H®, etc. But, compatibility with the FAST™ FTC Magnifier Mount will be limited.
The FAST™ Riser comes standard with a rail-grabber clamp. A Flip-Up Offset Backup Rear Iron Sight module can be purchased separately. This feature will provide fast-transition BUIS capability to the FAST™ Riser. The Offset Rear Iron Sight Module is 100% compatible with existing Offset Front Sights such as those available from MAGPUL, Dueck Defense, Midwest Industries, and Knights Armament Company.
The FAST™ Riser is built from 7075-T6 Aluminum and Type III Hardcoat Anodized Black or FDE*.
LEAP Aimpoint Magnifier Mount
Key features
Ultra-rigid and low-profile 30mm ring
Short-throw flip-to-side action
Symmetrical profile for right or left flip orientation
Co-witnesses perfectly with every Scalarworks Low Drag Mount
Repeatable zero with each installation via precision telescoping clamp
Lightest Quick-Detach Aimpoint Magnifier mount in existence
CNC Machined from ultra high strength 7075-T6 Aluminum
Proprietary recoil-proof thumbscrew with ball-detent attachment system
Tool-free self-adjusting to any size rail
Streamlined profile free of protruding levers or knobs
Compatibility
OPTICS: Aimpoint 3X-C, Aimpoint 3XMag, Aimpoint 3XMag-1, Aimpoint 6XMag-1, Most other 30mm tube Magnifiers
The TLR-1 HL provides an 1,000 lumen blast of light for maximum illumination while clearing a room or searching an alley. Its wide beam pattern lights up large areas so you can identify who or what is nearby.
- Click here for Data Sheet
- 1,000 lumens; 283m beam; runs 1.5 hours
- Rail clamp system securely attaches/detaches quickly and safely with no tools and without putting your hands in front of the muzzle
- Mounts directly to handguns with Glock-style rails and to all MIL-STD-1913 (Picatinny) rails
- Includes keys for Glock-style, Picatinny, Beretta 90two, S&W 99 and S&W TSW and Sig P320
- Durable, anodized machined aluminum construction
- Ambidextrous momentary/steady on/off switch
- User programmable strobe can be enabled/disabled
- Engineered optic produces a concentrated beam with optimum peripheral illumination
- Fits existing light bearing holsters
- IPX7 waterproof to 1m for 30 minutes
- Remote switches are available as optional accessories and must be used in conjunction with 69130 or 69161 remote door switch. All switches and door switch are sold separately. Reference TLR Accessories Brochure in DOCS/INFO tab for more information.
- Dual Remote Kit available (#69889). Kit includes TLR-1 HL with Safe Off Tail switch, Dual Remote Pressure Switch, (2) Mounting Clips, 3.75" Adhesive pad, (2 each) 11"; 8" & 4" Cable Ties & Instructions
- Long Gun Kit available (#69262). Kit includes TLR-1 HL with thumb screw, "safe off" door switch, remote pressure switch and mounting clips, and two 3V CR123A lithium batteries.
- Available in Black, Flat Dark Earth or Flat Dark Earth Brown
- Powered by two CR123A lithium batteries (included)
- 3.39" (8.61 cm); 4.32 oz (122.5g)
- Limited lifetime warranty
- Lithium Battery Notice under TECH DOCS
- Assembled in USA
**IN STOCK SHIPS IN 1-2 BUSINESS DAYS**
IF YOU HAVE ANY QUESTIONS, PLEASE EMAIL OUR SUPPORT TEAM AT SUPPORT@TRIARCSYSTEMS.COM.
Please note: If you are a resident of California, you must email your Law Enforcement credentials to our support team before placing your order, or it will be canceled due to state restrictions.
The TRI-11 Comp is a double-stack 2011-style pistol built on a Government or Commander frame, featuring a removable anodized aluminum compensator for recoil control and faster follow-up shots. It uses billet steel components and a hand-fitted match-grade TRACK barrel to deliver reliable, consistent performance in demanding conditions.
Every major component is custom designed with meaningful improvements to function, and precision CNC machined to the highest standards of fit & finish. Peak Sights are designed around a modern 15" sight radius. While carbine length rifles have become the norm, most fixed iron sights still use components designed for the M16A2's 20" sight radius.
Peak Sights have manually adjustable elevation (front) and windage (rear): Both with a refined 0.5MOA/click, which matches most Red Dot sights'.
The Peak sight post is CNC machined to the correct width for a 15" sight radius, non-rotating for finer adjustment, and flat faced to eliminate highlight bias.
Peak Sights have precision CNC milled apertures that are flat toward the shooter, so they won't create highlight bias.
FIREARMS: Any equipped with
MIL-STD-1913 Picatinny Rail
Front Sight
MATERIALS: 7075-T6 Aluminum + 4140H Steel
FINISHES: Type III Hard Anodizing + Flash Nitride®
CENTER HEIGHT OVER RAIL 1.42" (36mm)
ADJUSTMENT: 0.5MOA/Click @ 15" Sight Radius
ADJUSTMENT RANGE: 51MOA @ 15" Sight Radius
SIGHT POST: 1.35mm (0.053") width - Non-Rotating
WEIGHT: 0.94oz (26.5g)
MADE IN USA: Lifetime Warranty
Rear Sight
MATERIALS: 7075-T6 Aluminum + 4140H Steel
FINISHES: Type III Hard Anodizing + Flash Nitride®
CENTER HEIGHT OVER RAIL 1.42" (36mm)
ADJUSTMENT: 0.5MOA/Click @ 15" Sight Radius
ADJUSTMENT RANGE: 46MOA @ 15" Sight Radius
FLIP APERTURES: Same-Plane 0.07"/0.20" Diameter
WEIGHT: 1.44oz (40.7g)
MADE IN USA: Lifetime Warranty
Designed for shooters who want the lightest, strongest, and most compact quick-detach optic mount possible. A highly efficient clamp design guarantees precise operation and unprecedented rigidity: It features an oversize hooded thru-hole to buttress the thumbscrew's shank, which is the maximum possible diameter to fit a Picatinny channel. A pair of hardened steel precision ground pins is press fitted to the clamp and act as guides.
FIREARMS: Any equipped with
MIL-STD-1913 Picatinny Rail
OPTICS: Trijicon RM01, RM02, RM03, RM04, RM05, RM06, RM07, RM08, RM09, SRO1, SRO2, SRO3, Holosun 507C
Standalone (Lower-Third)
MATERIALS: 7075-T6 Aluminum + 4140H Steel
FINISHES: Type III Hard Anodizing + Black Oxide
CENTER HEIGHT OVER RAIL1.57" (40mm)
WEIGHT: 1.59oz (45.0g)
MADE IN USA/ Lifetime Warranty
Designed for shooters who want the lightest, strongest, and most compact quick-detach optic mount possible. A highly efficient clamp design guarantees precise operation and unprecedented rigidity: It features an oversize hooded thru-hole to buttress the thumbscrew's shank, which is the maximum possible diameter to fit a Picatinny channel. A pair of hardened steel precision ground pins is press fitted to the clamp and act as guides.
FIREARMS: Any equipped with
MIL-STD-1913 Picatinny Rail
OPTICS: Trijicon MRO, MRO Patrol
Standalone
MATERIALS: 7075-T6 Aluminum + 4140H Steel
FINISHES: Type III Hard Anodizing + Black Oxide
CENTER HEIGHT OVER RAIL 1.42"
WEIGHT: 1.45oz (45.0g) + 0.06oz (1.8g)
MADE IN USA: Lifetime Warranty
TRIARC Systems TRILOK Handguard
TRIARC is proud to announce the introduction of the new TRILOK Handguard. Developed through a valued partnership, this handguard was custom designed to combat the challenges that many face with modern handguard systems. With so many accessories and configurations necessary for weapon function, TRIARC understands that platforms must fit users’ specific needs. Instead of adjusting your gear, habits, and muscle memory to the system, the TRILOK Handguard adjusts to you.
This handguard has three significant features that make it uniquely tailored for strength, ease of use, and adaptability.
Wedge Lock System: This rail attaches to the rifle through a wedge lock system and a steel barrel nut. During military testing, this locking mechanism has made a name for itself as one of the strongest and most reliable attachments on the market.
7-Sided M-LOK System: M-LOK innately features flexibility for attaching various accessories to rifles. TRIARC has made this system even more adaptable as TRILOK has 7 sides to choose from, instead of being limited to only 3. This means more ways to configure accessories to your own specs.
Integrated QD Mount: TRILOK features a streamlined built-in QD mount to eliminate extra bulk and accessories. The sling sockets on this QD mount are made out of steel—making them much more reliable to last for the long haul. This QD mount also has an anti-rotational feature to keep everything locked in its place, which prevents unnecessary distraction and hassle.
Built to TRIARC standards, the TRILOK Handguard is another tailored solution to keep you Pushing Forward.
*Please allow 2 to 4 business days to ship.*
**35% off a TRIARC Easy Pin Low Profile Gas Block with purchase of Handguard**
Streamlight, TLR-1 Game Spotter, Fits Long Gun w/1913 Rails, C4Green LED, 150 Lumens, Black Housing, 2x CR123 Batteries
